Tag Archive | "side feed injectors"

Top Feed vs Side Feed Fuel Injectors

Tags: , ,

Top Feed vs Side Feed Fuel Injectors

Posted on 15 December 2014 by admin

Most people are lucky enough to have engines than run top feed injectors so upgrades are quite easy (4G63 owners you lucky bastards!) but on the other hand some of us manage to get stuck with side feeds and most commonly all our favourite and easy to find jap turbo motors such as the early SR20, 3SGTE, 1ZJGTE, RB25DET, EJ20 all seem to be side feed.

Side feed and top feed fuel injectors are the two main types of fuel injectors used in our motors, if you have ever had a motor that ran side feel injectors and planned on upgrading your efi system then chances are you would have probably heard people telling you to upgrade you injectors to top feed ones.

Telling the difference between the two injectors is pretty simple as their names sum up the differences pretty well.

SR20 Sidefeed Injectors

SR20 Sidefeed Injectors bolt straight into the fuel rail

Side Feed Injectors:

The fuel will enter through a slot in the side of the injector, the fuel injector sits in the fuel rail and the rail is fixed to the manifold or head.

Because side feed injectors are mounted in the fuel rail and are surrounded by fuel it provides a better cooling effect, in turn you can run a higher duty cycle and push them a bit harder with less chance of failure than a top feed.

Top Feed Injectors:

Fuel enters from the top of the injector, the injector sits in-between the fuel rail and the head.

SR20 Intake Manifold Converted to Top Feed

SR20 Intake Manifold Converted to Top Feed

Upgrading from side feed to top feed:

There are many reasons why you might want to change to side feed injectors but if your car is stock with no modifications there is no point in changing your injection system, it’s a lot easier and cheaper to stick with the side feeds until you actually require a higher flowing injector as there really isn’t any added benefits to a top feed or a side feed, it is just a different way of accomplishing the same thing –injecting fuel! Until then your money is better off spent somewhere else.

However there are many good reasons why you might need to change to top feed, such as:

Side Feeds are expensive!

– Deatschwerks sell 850cc side feed injectors and they cost around $750, Deatschwerks also sell top feed 850cc’s for around $550. That’s around $200 in difference!

You need injectors larger than 1000cc

– Deatschwerks have developed 1000cc side feed injectors, providing your fuel rail can support that amount of flow it might be worthwhile however for anything above this size you will defiantly need to change to top feed! Especially if you are planning on running e85 since it requires around 30% more flow than regular petrol.

Aftermarket intake manifolds

– Most aftermarket manifolds use top feed because replacing the intake manifold is part of an overall upgrade for more power, once you required a bigger manifold then you will need more fuel.

Stock Fuel rail has poor flow

– Unfortunately a lot of stock side feed fuel rails don’t flow the best, some companies offer services to bore out a fuel rail but it’s not always possible and I have never heard of a top feed rail being maxed out. The money spent on boring a fuel rail and buying expensive high flow side feed injectors could have already paid for a top feed conversion.

Due to the different mounting of the injectors and where the fuel flows into the injector the change from side feed to top feed will require a new fuel rail that is designed for top feed fuel injectors, usually you will require an adapotr
Depending on your current brand of injectors you may also have to change the connectors / plugs on the engine loom as different manufactures use different plugs.

Notice the injector bosses  for using the smaller side feed injectors.

Notice the injector bosses for using the smaller side feed injectors.

Top feed advantages:

• More affordable to find injectors over 800cc
• Fuel pressure is usually more stable on a top feed rail
• Top feed rails flow more than side feeds
• More commonly used and available
• Largest size is 2000cc

Top feed disadvantages:

• New rail required if upgrading from side feed
• Fuel doesn’t provide a cooling effect to the injector

Side feed advantages:

• Cooled by fuel as they are mounted in the rail

Side feed disadvantages:

• Expensive
• Limited range of injectors
• Usually restricted by stock fuel rail
• Largest size is 1000cc
• More prone to leaks

What about running a second set of injectors?

Another option that some folks choose is to run a second set of injectors but when you think about it, the time and money it will cost to have a second set of injector bosses machined into your manifold, additional fuel pump and lines, fuel rail and the injectors themselves will cost more than a good set of side feeds or a top feed conversion.
Let’s also not forgot about the stock ecu as it can’t run 4 secondary injectors correctly, it will need to be replaced with something fully programmable with a second set of injector drivers and also the money spent on tuning.

Unless you have a 3000hp motor that requires 2 sets of 1500cc injectors or you just have all the tools and equipment and plan of having fun then its beyond me why people run a second set.

Comments (0)

RELATED SITES